Hi All, this isn't strictly a Sky issue but an output one. Feel free to redirect to the sky forums if it ends up needing to be there.I have a 47 inch LG TV and the HDMI ports have just gone kaput (a common issue with LG LCD I read) so I've had to find out another way to get a signal from SKy to the TV.I have a yicky yellow Red and White RCA cable and a component cable (red green blue).Everything works fine with the RCA cable, but it looks a little furry. When I plug the component in and select component to be active in the skybox it works then doesn't. Audio is coming through the red white cables.It was working properly and then I went to show the wife the difference between RCA and Component the component crapped out and now it won't come back. I can switch back to yellow plug and reconfigure the sky box to use component to try again. It looks fine - it's set to active (option 1).Is there anything weird i need to do to get component working? Do I need to unplug any other cables in case there's a clash. I'm not super clued up with the ins and outs of cables etc. Apologies if I've not explained myself clearly :)Thanks
↧